Mike & Pops Bar and Grill
This project was at Mike & Pops Bar and grill on Delware Ave. in Kenmore. We installed the bathrooms, hallways & dining room floor.
The bathrooms were coated with a Charcoal 1/ 1/4 two chip brindle flake, the dinning room was a beautiful brick Maroon 1/4 flake.
Both floors were a 5 layer chip system w/ 2 moisture vapor barriers on the top and bottom of the coating, after we installed high build polyaspartic sealer w/ a chemsealer coating under that. Lifetime warranty.
DCE POLYMER LLC
![](https://dcepolymers.com/wp-content/uploads/2023/03/329961253_176363878442754_5403647181971933429_n-1024x768.jpg)
![](https://dcepolymers.com/wp-content/uploads/2023/03/329556515_238619645180311_1597262343118423191_n-1024x768.jpg)
![](https://dcepolymers.com/wp-content/uploads/2023/03/331407630_162023519957959_2184185107649769637_n-1024x768.jpg)
![](https://dcepolymers.com/wp-content/uploads/2023/03/331588186_686774669796168_531902458164751181_n-1024x768.jpg)
![](https://dcepolymers.com/wp-content/uploads/2023/03/333514707_182758161125563_4182599794631062492_n-1024x768.jpg)
![](https://dcepolymers.com/wp-content/uploads/2023/03/331487009_529972142610642_1972680343751418698_n-1024x768.jpg)
![](https://dcepolymers.com/wp-content/uploads/2023/03/330555918_5663036070490158_7537603432726453901_n-1024x768.jpg)